|Home||» Products||» Industrial Regulator||» Pressure Regulator (High Pressure & High Flow)|
Pressure Regulator (High Pressure & High Flow)
REG-0203 Pressure Regulator is a direct operated spring loaded type regulator. These regulators are suitable for Natural Gas, LPG, Air & similar applications. It provides economical pressure reducing control in a variety of Residential Commercial & Industrial Applications.
Technical Specification :
|Valve Body||Cast Iron|
|Surface Treatment||Power Coating|
|Inlet Connection||1" BSP (F)|
|Outlet Connection||1" BSP (F)|
Spring Ranges :
|Grey||Outlet Pressure||Spring Colour|
|0-17 Bar||0-1 Kg/ cm2||Grey|
|0-2 Kg/ cm2||Yellow|
|0-5 Kg/ cm2||Red|
Working Principle : When downstream demand decreases, pressure under the diaphragm increases. This pressure overcomes regulator setting which is set by a spring. This results in movement of pad holding assembly towards seat to minimize gas flow area. If the demand of downstream increases, pressure under the diaphragm decreases. Spring force pushes the diaphragm lever assembly downwards which results in movement of pad holding assembly away from the seat to increase the gas flow area.
GA Drawing & Part List
Adjustment :To increase the outlet pressure setting of the regulator, the spring adjustment screw (Part No. 6) must be turned colkwise with the help of 14 mm spanner. This requires loosening of lock nut. Do not adjust the spring to produce an outlet pressure setting above the limit identified on the information Label. After the completion of Spring adjustment,tighten the lock nut.
Spare Part Use :
|6||Spring Adj. Screw|
|9||Nut Pad Holder|